How to connect Remootio to a WiFi network

1. Make sure that your smartphone is connected to the WiFi network you want to connect Remootio to and tap on the settings icon.

Remootio - tap on the settings icon

2. Tap on the Wi-Fi icon

Select the WiFi icon

3. Scan for Wi-Fi networks

Scan for WiFi Networks

4. Select the Wi-Fi network you would like to connect Remootio to

Select your home Wi-Fi network

5. Would you like to enable internet access as well?

You can decide if you would like to use Remootio on your local Wi-Fi network only (no data goes through the internet) OR if you would like to also be able to control and monitor your gate or garage door from anywhere in the world over the internet.

Would you like to enable internet access?

6. Wait for the Remootio app to connect to your Wi-Fi network

Wait for the Remootio unit to connect to your Wi-Fi network

If the setup process is successful you'll see the IP address of your Remootio unit in a few seconds. If there was a problem, then you'll get an error message. The most common cause of failure is an incorrect password. Please make sure that the password you've entered is correct and try again if needed.

If the setup process was successful, you are ready to use Remootio via Bluetooth, Wi-Fi and over the internet (depending on whether you selected "Yes" when asked about enabling the internet connection).