It is possible to control electric strikes but it really comes down to the voltage (and current) that has to be switched.
The relays of the Remootio units are rated for 24VDC 1A / 120VAC 1A. This is probably not enough to switch the current directly to the lock. But maybe your electric lock has additional "driver electronics" that can take inputs from the Remootio and forward the command to the lock. The Remootio unit has normally open, potential free contacts that can be closed to send a signal to the control electronics.
So it is possible to control electric locks but it has to be checked carefully, how it can be hooked up.
Following is a general wiring diagram for electric strikes;
If you have any additional questions, please contact us at firstname.lastname@example.org